Configure the network settings in [System Settings] according to your environment and how you will be using the machine.

The following procedure explains connecting this machine to an IPv4 network using Ethernet cable.

Find IP machine.

  1. Go to your PC and type [Command Prompt]
  2. Type [ipconfig] and press Enter.
  3. There will show [IPv4 Address, Subnet Mask & Default Gateway]. Take note the [Subnet Mask & Default Gateway].
  4. Type [ping 192.168.0.88]- example, 192.168.0- network, 88- host. You can change the host number but network you can’t change. If what you ping is [Destination host unreachable] that’s mean the IP is free to use for machine. Make sure before you ping the network is same as [IPv4 Address].

To Submit the IP to Machine

  1. Press the [User Tools/Counter] key, and then press [System Setings].
  2. Press the [Interface Settings] tab.
  3. Press [Machine IPv4 Address] to submit the machine’s IPv4 address that you ping and get unreachable, and press OK.
  4. Press [Machine IPv4 Address] again to submit subnet mask, and press OK.
  5. Press [IPv4 Gateway Address] and then submit the IPv4 gateway address, and press OK.
3503Rental1
3503Purchase1
5503rental1
5503purchase1
3504Rental1
3504purchase1
5504Rental1
5504purchase1
3500Rental1
3500purchase1
5500Rental1
5500Purchase1
RentalScheme11
RentalScheme4
RentalScheme22
PurchaseScheme22
previous arrow
next arrow

© 2023 Bizcopier Solutions Sdn Bhd

💬 Get a Quote Now!